Regulators & Cylinders
Regulators
Use of the proper gas regulator for reducing pressure of gases contained in high-pressure gas cylinders is critical. Using the wrong gas regulator can result in compromising gas purity or accuracy, premature equipment failure, or even personal injury. Bhuruka helps to select the right gas regulator to the specialty gas you use. Simply specify the type of specialty gas you are using and Bhuruka will recommend the appropriate gas regulator(s) for your application.
Chrome – Plated Single Stage High Purity Regulator – Non-corrosive Service
The chromium plated brass, diaphragm type, high purity single stage regulators, designed to control high purity, non-corrosive gases for applications where minor fluctuations in outlet pressure due to diminishing inlet pressure can be tolerated. These regulators are highly recommended for acetylene and liquefied hydrocarbon gas applications with a maximum inlet Pressure of 350 psig.
Chrome – Plated Dual Stage High Purity Regulator – Non-corrosive Service
The chromium plated brass, diaphragm type, high purity dual stage regulators, , are designed to control high purity, non-corrosive, pure gases and mixtures in applications where constant delivery pressure regardless of fluctuations in tank pressure are required. These regulators are highly recommended for non-flammable and non-corrosive gases applications.
Stainless Steel Single Stage High Purity Regulator- Corrosive Service
The stainless steel, diaphragm type, high purity single stage regulators, are designed for ultra high purity, corrosive, reactive or toxic gas applications where slight variance in delivery pressure is acceptable as cylinder pressure decreases. The materials of construction will not off-gas and contaminate the gas stream. The design is highly resistant to inboard diffusion of atmospheric contaminants.
Stainless Steel Dual Stage High Purity Regulator – Corrosive Service
The stainless steel, diaphragm type, high purity dual stage regulators, are designed for ultra high purity, corrosive, reactive or toxic gas applications where constant delivery pressure is required as inlet pressure decreases. The materials of construction will not off-gas and contaminate the gas stream. The design is highly resistant to inboard diffusion of atmospheric contaminants.
Cylinders
Carbon Steel Cylinders
The gas industry heavily depends on cylinders to store and transport gases. Because the cylinders are packed with gases under high pressure, they can be volatile. So they must be tough enough to withstand rough handling during transportation to prevent accidents.
The gas industry heavily depends on cylinders to store and transport gases. Because the cylinders are packed with gases under high pressure, they can be volatile. So they must be tough enough to withstand rough handling during transportation to prevent accidents.
Bhuruka supplies high quality high-pressure gas cylinders ranging from 1 ltr water capacity to 80 ltrs water capacity– for oxygen, hydrogen, nitrogen, argon, helium, air etc Cylinders for the domestic market are produced as per IS-7285, certified by the Bureau of Indian Standards (ISI) and approved by the Chief Controller of Explosives, Government of India.
Specifications
| Max Working Pressure at 15C |
Test Pressure | Water Capacity 1 Ltr |
Gas Capacity Cu.m |
Outside Dia “D’ |
Minimum Wall Thickness ‘t ‘mm |
Length ‘L’ mm |
Tare Weight K.g |
|---|---|---|---|---|---|---|---|
| 150 kgf/ cm | 250 kgf/ cm | 1.0 | 0.15 | 76 | 3.2 | 310 | 2.5 |
| – | 2.0 | 0.30 | 108 | 3.5 | 330 | 4.5 | |
| – | 3.0 | 0.45 | 108 | 3.5 | 465 | 5.1 | |
| – | 5.0 | 0.75 | 108 | 3.5 | 734 | 8.0 | |
| – | 10.0 | 1.50 | 140 | 4.2 | 845 | 14.8 | |
| – | 46.7 | 7.0 | 232 | 5.5 | 1370 | 54.0 | |
| – | 50.0 | 7.50 | 232 | 5.5 | 1455 | 58.0 | |
| – | 50.0 | 7.50 | 267 | 6.3 | 1150 | 63.0 | |
| – | 80.0 | 12.00 | 267 | 6.3 | 1738 | 88.0 | |
Aluminum Cylinders
Aluminum cylinders are the best choice for specialty / Calibration gases (depends on compatibility) because it maintain the gas purity. The cylinders are light and consistent in weight, non-magnetic, corrosion free and are available in wide range of sizes and capacities. Special internal treatments are also done for precise needs. The cylinders perform well at low temperature.
Specifications
| Max Working Pressure at 15C | Test Pressure | Water Capacity 1 Ltr | Gas Capacity Cu.m | Outside Dia “D’ | Length ‘L’ mm | Tare Weight K.g |
|---|---|---|---|---|---|---|
| 150 kgf/ cm | 250 kgf/ cm | 10.0 | 1.5 | 7.5 In | 23.5 In | 10.27 Kgs |